EASYSTEAM ES
Brochure download

ELECTRODE STEAM HUMIDIFIERS
Easysteam ES is the most evolved and flexible solution for steam humidification of any environment. The integrated electronic control permits to configure and optimize the humidifier on the basis of customer's specific requirements and to guarantee its long-lasting thanks to diagnostic routines. Stainless steel removable front cover, spring clamps cylinders and quick connection power connector permit a rapid and simple maintenance. The full range of models and accessories satisfy all installation requirements.

Pego Electrode steam humidifiers ES

 

 

Pego Electrode steam humidifiers ES

 

Pego Electrode steam humidifiers ES

 

 

 

Cold Drain Adapter

Applications
Steam/humidity generator for industrial plants, offices, civil facilities, call centres, hotels, museums and bookshops, technological or medical facilities, tobacco industry, food industry, seasoning, wood industry, paper mills, printing industries and steam rooms.


Main characteristics
Electrodes steam humidifiers.
Single-phase power supply versions with steam producing up to 6 kg/h.
Three-phase power supply versions with steam producing up to 48 kg/h.
Master/slave humidifiers management (up to 6 units) to reach steam productions up to 288 kg/h.
Structure entirely of stainless steel and abs plastic.
Easily interchangeable cylinders with steel electrodes, limestone filter on the bottom, maximum level sensor and connector connections.
Solenoid valve for water charging.
Tough and reliable drain pump.
Available cylinders for low conductivity water (minimum conductivity limit 125 μs/cm).
Arrangement for fan unit power supply.
Cold Drain Adapter integrated for the connection of the condensate drain and predisposition for the mounting of the Cold Drain KIT for cooling water discharge. Possible to order humidifiers with Cold Drain KIT already mounted.
Integrated electronic control.
Large accessories range.

Electronic control
Featuring numerous parameters and an user-friendly display, the EASYSTEAM controller allows precise setting of humidifiers performance. Thanks to the high number of available variables it is possible to personalize humidifier functioning on the basis of customer requirements.
Eight operating modes can be set among which ON/OFF from external contact, proportional with built-in humidistat and 4-20mA or 0-10V probe, proportional with external 0-10V signal. Built-in thermostat ON/OFF. BMS control via Modbus.
Duct probe management.
Optimised use for steam baths thanks to the built-in temperature control, essence management, inlet and exhaust fan control.
Settable with maximum capacity.
Proportional regulation of steam dispensing from 20% to 100%.
Steam dispensing reduction from digital input.
Programmable automatic drainage when not used.
Management of up to 6 humidifiers in battery with master/slave configuration.
Humidifier operating hour meter.
Maximum level sensor management.
Control console with large display and status icons for reading and programming work data remotely up to 100 m away with a simple phone cable.
Diagnostics for problems identifying or maintenance need.
Serial RS485 connection with Modbus protocol.

 

TECHNICAL CHARACTERISTICS
ES3-M
ES6-M
ES6
ES12
ES24
ES48
Dimension (mm)
430x525x240
430x525x240 430x525x240 430x625x240
430x710x240
660x710x290
Empty weight
10 Kg 10 Kg
10 Kg
12 Kg
19 Kg
38 Kg
Working weight
12 Kg 13 Kg 13 Kg 18 Kg 37 Kg 74 Kg
Steam production 3 Kg/h 6 Kg/h 6 Kg/h 12 Kg/h 24 Kg/h 48 Kg/h
Electrical power supply
230V 50/60 Hz 230V 50/60 Hz 400V 3/N
50/60 Hz
400V 3/N
50/60 Hz
400V 3/N
50/60 Hz
400V 3/N
50/60 Hz
Power
2 kW 4,5 kW 4,5 kW 9 kW 18 kW 35 kW
Absorption
9 A 19 A 6,5 A 13 A 25 A 51 A
Electronic control
CONSOLLE NANO + MASTER HUM2
Power supply control
230V 50/60 Hz
Steam connector
1 x 25 mm 1 x 25 mm 1 x 25 mm 1 x 25 mm 1 x 40 mm 2 x 40 mm
Water charging connection
3/4"G male 3/4"G male 3/4"G male 3/4"G male 3/4"G male 3/4"G male
Water discharge connection 40 mm 40 mm 40 mm 40 mm 40 mm 40 mm
Number of cylinders
1 1 1 1 1 2
Water pressure
1-10 Bar
Limits of water's hardness
160-450 mg/l CaCO3 160-450 mg/l CaCO3 160-450 mg/l CaCO3 160-450 mg/l CaCO3 160-450 mg/l CaCO3 160-450 mg/l CaCO3
Conductivity of water
250-1300 µS/cm 250-1300 µS/cm 250-1300 µS/cm 250-1300 µS/cm 250-1300 µS/cm 250-1300 µS/cm
Cold drain adapter
PRESENT
Cold drain kit
OPTIONAL
Fan unit

n° 1, OPTIONAL

On board or remote mounting

n° 1, OPTIONAL

On board or remote mounting

n° 1, OPTIONAL

On board or remote mounting

n° 1, OPTIONAL

On board or remote mounting

n° 1, OPTIONAL

On board or remote mounting

n° 2, OPTIONAL

Remote mounting

DIMENSION
Pego Humidifier ES
Pego Humidifier ES Pego Humidifier ES

Pego Humidifier ES

Pego Humidifier ES

Pego Humidifier ES

 

DOWNLOAD INSTRUCTION
Instruction manual